Other OEM Parts

Parts to drawing · pump and valve · mining spares · assemblies

Spares that belong to no family: pump and valve parts, wear parts for mining equipment, replacements for machines nobody supports anymore, and small OEM batches. Where the original is out of production, send the sample and we measure it, put the dimension chain and the material on the route card, then cut metal. One piece or a small batch, no minimum order.

Quote this part +86 187 3757 7920

Conical sleeve turned to drawing, outside and bore finished — Conical sleeve machined to drawing

Specifications

Batch size: One-off to small batch
Input: Drawing · sample · agreed sketch
Material: Carbon steel, alloy steel, stainless, cast iron — per drawing
Inspection: Dimensions · mill certificate · geometry on request

Typical use

Pump and valve parts, seals
Wear parts and spares for mining equipment
Replacements for discontinued machines
Small OEM batches and assemblies

No drawing is workable: send the sample or the key dimensions and we produce the drawing for you to confirm before machining.

Working without a drawing

How we measure a part that has no drawing

Typical process

01
Drawing review / measuring
we draw it when there is no drawing
02
Cutting
by material and allowance
03
Rough machining
turning, milling, boring as routed
04
Heat treatment
when the drawing calls for it
05
Finish machining
to drawing size and roughness
06
Holes and slots
per hole layout
07
Inspection
dimensions and mill certificate
08
Packing and dispatch
for the way it ships

View parts

Red heavy-duty wire rope sheave with a machined groove around the rim, spoked steel web and central hub

Heavy-Duty Wire Rope Sheave for Cranes and Excavators

Custom sheaves machined from forged C45 or 42CrMo, or cast ZG310-570 steel, with a precision rope groove and optional hardening.

Teal-painted horizontal cylindrical shell with a black riding ring band at mid-length, two square bolted manholes and flanged ends.

Horizontal Ball Mill Shell Assembly

Heavy horizontal steel shell assembly with a black riding ring for rotary support, bolted inspection manholes and replaceable wear liners inside. Built for mineral, cement and metallurgical grinding.

Horizontal cylindrical mill shell, flanged ends, dense grid of liner tension bolts on the outer wall, roller supports.

Ball Mill Shell

A horizontal ball mill shell rolled and welded from thick steel plate. Flanged ends locate the end covers and trunnions, and bolts on the outer wall clamp the wear liners.

Red cylindrical idler rollers in a steel stillage, each with a tube body, recessed bearing seat and projecting shaft end.

Conveyor Parallel Idler Roller

Seamless steel tube roller body with sealed bearings at both ends, supporting belt and bulk material on belt conveyors. Interchangeable, suited to dusty, heavy-duty service.

Cylindrical screen drum in three bolted flange sections, with vertical stiffener ribs and wedge wire screen panels.

Segmented Wedge Wire Screen Drum

Vertical cylindrical screen drum of three bolted flange sections. Wedge wire welded screen gives high open area and self-cleaning flow; used for screening and dewatering.

Vertical cylindrical crushing chamber assembly, upper conical top cover, central circular feed opening, top cover bolted to cylinder flange, side with replaceable wear liners.

Mill Scoop Feeder

Vertical shaft impact crusher crushing chamber assembly, welded cylinder and flange-connected conical top cover, with replaceable wear liners on the side, used for sand making and aggregate shaping.

Grey welded ball mill end cover: cylindrical body, large top flange with radial stiffener ribs, lower flange on short legs.

Ball Mill End Cover Assembly

Welded steel end cover assembly for ball and rod mills. It mates with the mill shell to form a closed grinding chamber and carries the trunnion support interface.

Ball mill shell assembly: cylindrical welded shell with liner bolt holes, flanged end cover and machined hollow trunnion.

Ball Mill Shell Assembly with Hollow Trunnion

Horizontal ball mill shell assembly: a welded drum, a bolted end cover and a machined hollow trunnion that carries the grinding charge and lets material and air pass through.

Green multi-groove friction wheel: welded spoke body, parallel rope grooves, split bearing housing, welded base frame.

Multi-Rope Mine Hoist Friction Wheel Assembly

Main friction wheel assembly for multi-rope mine hoists: welded spoke-type wheel body with grooved rim and friction linings, main shaft in a split bearing housing, welded base frame.

Tapered cone body with stepped journals at both ends, threaded section on one journal, resting on a square-tube stand.

Cone Crusher Main Shaft Assembly

One-piece cone crusher shaft assembly with a tapered cone body and stepped journals at both ends, driven in an eccentric swing to crush ore and rock.

One-piece cone-shaped cast liner with machined inner and outer conical surfaces and lifting lugs around the outside.

Cone Crusher Bowl Liner (Stationary Cone Liner)

One-piece cast bowl liner for the stationary side of cone crushers. Machined locating faces and lifting lugs support installation and replacement in abrasive crushing duty.

Non-standard · weldments · one-off to small batch

Custom parts to drawing

Need us to confirm fixturing and operations against your drawing? Send the part size, material and quantity; we will review the process against the machines we have.

Send a drawing, get a quote